Anker Celerta ZZ Sewing Machine Parts
New parts for your machine below. Choose a foot, belt, bobbin or needle, then check out with PayPal or card.
Pay with PayPal or card
Anker Celerta ZZ Bobbin Winder Ring Tyre
Replacement rubber ring for the bobbin winder.
Anker Celerta ZZ Rubber Stretch Belt
Replacement drive belt to restore smooth machine running.
Anker Celerta ZZ Motor, Belt & Foot Control Set
Foot control to start, stop and vary sewing speed.
Anker Celerta ZZ Bobbin Case
Holds the bobbin and controls lower-thread tension.
Anker Celerta ZZ Metal Bobbins x 10
Pack of 10 sturdy metal bobbins, ready to wind and sew.
Anker Celerta ZZ 2 Packets of 10 Organ Assorted Needles
Two packs of Organ needles in mixed sizes for everyday sewing.
Anker Celerta ZZ Walking Foot & Guide & Instructions
Feeds thick layers evenly so seams stay matched. Guide and instructions included.
Anker Celerta ZZ Zig Zag Presser Foot
Everyday foot for zig zag stitching and light decorative work.
Anker Celerta ZZ Straight Stitch Foot
Gives a clean, even straight stitch for seams and topstitching.
Anker Celerta ZZ Adjustable Invisible Zip Foot
Sews concealed zips close to the teeth for a tidy finish.
Anker Celerta ZZ Adjustable Zip / Zipper Foot
Sews standard zips and edged trims right beside the teeth.
Anker Celerta ZZ Hinged Teflon Zip Zipper Foot
Non-stick zip foot that slides over leather, vinyl and sticky fabrics.
Anker Celerta ZZ Roller Foot
Rolls over leather, vinyl and other fabrics that stick or drag.
Anker Celerta ZZ Straight Stitch Teflon Foot
Non-stick foot for straight stitching on leather, vinyl and coated cloth.
Anker Celerta ZZ Non-Stick Zig Zag Teflon Foot
Non-stick zig zag foot for leather, vinyl and other sticky fabrics.
Anker Celerta ZZ Darning Foot
Free-motion foot for darning holes and mending worn areas.
Anker Celerta ZZ Free Hand Embroidery / Darning Foot
For free-motion embroidery and darning with the feed dogs lowered.
Anker Celerta ZZ Free Motion Embroidery / Quilting Foot
Large opening for free-motion embroidery, quilting and creative work.
Anker Celerta ZZ Free Motion Quilting Foot - Open Toe
Open front gives a clear view while free-motion quilting.
Anker Celerta ZZ Adjustable Blind Stitch Foot
Sews almost invisible hems on skirts, trousers and curtains.
Anker Celerta ZZ 3 Mixed Piping Feet - 1x 1/8 inch - 1x 1/4 inch - 1x 3/8 inch
Three piping feet covering 1/8", 1/4" and 3/8" cord sizes.
Anker Celerta ZZ 1/8 Inch Groove Piping Foot
Sews fine piping with 1/8" cord for delicate edges.
Anker Celerta ZZ 3/16 Inch Groove Piping Foot
Sews piping with 3/16" cord close and even along the edge.
Anker Celerta ZZ 1/4 Inch Groove Piping Foot
Sews piping with 1/4" cord close and even along the edge.
Anker Celerta ZZ 3/8 Inch Groove Piping Foot
Sews piping with 3/8" cord close and even along the edge.
Anker Celerta ZZ Clear View 3/16 Inch Piping Foot
Clear foot for 3/16" piping so you can see the cord as you sew.
Anker Celerta ZZ Double Groove 1/4 Inch Piping Foot
Double groove for 1/4" piping and twin-cord decorative work.
Anker Celerta ZZ Ruffler Foot & Instructions
Creates neat gathers and pleats in one pass. Instructions included.
Anker Celerta ZZ 1/4 Inch Plastic Quilting Foot & Guide
Keeps a steady 1/4" seam for patchwork. Guide included.
Anker Celerta ZZ 1/4 Inch Metal Quilting Foot & Guide
Metal 1/4" foot with guide for accurate patchwork seams.
Anker Celerta ZZ Slide Buttonhole Foot
Sliding foot for measured buttonholes of a consistent length.
Anker Celerta ZZ Button Hole Foot
Helps you sew neat, evenly sized buttonholes.
Anker Celerta ZZ Open Toe Buttonhole Foot
Open toe for a clear view when placing buttonholes.
Anker Celerta ZZ Button Sew On Foot
Holds the button steady while you stitch it in place.
Anker Celerta ZZ Bias Tape Binding Foot
Feeds bias tape so you can bind raw edges in one pass.
Anker Celerta ZZ Bias Binder Binding Foot
Folds bias binding and stitches it onto the fabric edge.
Anker Celerta ZZ 1/8 Rolled Hem Foot
Rolls a narrow 1/8" hem on light fabrics such as chiffon.
Anker Celerta ZZ 6mm Rolled Hem Foot
Rolls a 6mm hem on light to medium-weight fabrics.
Anker Celerta ZZ Knit Foot
Helps feed stretch and knit fabrics with less puckering.
Anker Celerta ZZ 6mm Felling Foot
Forms neat flat-fell seams about 6mm wide.
Anker Celerta ZZ Adjustable Sequins Ribbon Foot
Guides sequins, ribbon or braid so you can sew them on neatly.
Anker Celerta ZZ Fringe Tailor Tacking Foot
Forms fringe loops and tailor tacks for marking or trim.
Anker Celerta ZZ Gathering Foot
Gathers fabric as you sew — ideal for ruffles and fullness.
Anker Celerta ZZ Shirring Foot
Makes even shirring and soft elasticated gathers.
Anker Celerta ZZ 5 Groove Pintuck Foot
Twin-needle pintucks with five grooves for neat spacing.
Anker Celerta ZZ 9 Groove Pintuck Foot
Twin-needle pintucks with nine grooves for finer spacing.
Anker Celerta ZZ Applique Foot
Clear view for applique work and satin-stitch edges.
Anker Celerta ZZ Open Toe Embroidery Foot
Open front so you can see clearly while embroidering.
Anker Celerta ZZ Overcast Edging Foot
Neatens raw edges with an overcast stitch to reduce fraying.
Anker Celerta ZZ Edge / Joining Stitch In A Ditch Foot
Joins fabric edges or stitches neatly in the ditch for binding and quilting.
Anker Celerta ZZ Ruler Foot
Runs against quilting rulers for smooth, guided free-motion lines.
Anker Celerta ZZ 3 Strand Multi Cording Foot
Holds up to three cords for neat decorative cording.
Anker Celerta ZZ Multicord Foot 5 Hole
Guides up to five cords for decorative multi-cord stitching.
Anker Celerta ZZ Shuttle Hook
Replacement hook that forms the lockstitch with the bobbin thread.
Anker Celerta ZZ Oil 1 Ounce Bottle
Clean sewing-machine oil for regular lubrication and quieter running.
Anker Celerta ZZ 4 x Red Sewing Machine Spool Pin Felts
Replacement red felts for spool pins on many Singer and other machines.