Jones M882 Sewing Machine Parts
New parts for your machine below. Choose a foot, belt, bobbin or needle, then check out with PayPal or card.
Pay with PayPal or card
Jones M882 Replacement YDK Foot Control Pedal
Foot control to start, stop and vary sewing speed.
Jones M882 Rubber Stretch Belt
Replacement drive belt to restore smooth machine running.
Jones M882 Bobbin Winder Ring Tyre
Replacement rubber ring for the bobbin winder.
Jones M882 Motor, Belt & Foot Control Set
Foot control to start, stop and vary sewing speed.
Jones M882 Bobbin Case
Holds the bobbin and controls lower-thread tension.
Jones M882 Metal Bobbins x 10
Pack of 10 sturdy metal bobbins, ready to wind and sew.
Jones M882 2 Packets of 10 Organ Assorted Needles
Two packs of Organ needles in mixed sizes for everyday sewing.
Jones M882 Walking Foot & Guide & Instructions
Feeds thick layers evenly so seams stay matched. Guide and instructions included.
Jones M882 Zig Zag Presser Foot
Everyday foot for zig zag stitching and light decorative work.
Jones M882 Straight Stitch Foot
Gives a clean, even straight stitch for seams and topstitching.
Jones M882 Adjustable Invisible Zip Foot
Sews concealed zips close to the teeth for a tidy finish.
Jones M882 Adjustable Zip / Zipper Foot
Sews standard zips and edged trims right beside the teeth.
Jones M882 Hinged Teflon Zip Zipper Foot
Non-stick zip foot that slides over leather, vinyl and sticky fabrics.
Jones M882 Roller Foot
Rolls over leather, vinyl and other fabrics that stick or drag.
Jones M882 Straight Stitch Teflon Foot
Non-stick foot for straight stitching on leather, vinyl and coated cloth.
Jones M882 Non-Stick Zig Zag Teflon Foot
Non-stick zig zag foot for leather, vinyl and other sticky fabrics.
Jones M882 Darning Foot
Free-motion foot for darning holes and mending worn areas.
Jones M882 Free Hand Embroidery / Darning Foot
For free-motion embroidery and darning with the feed dogs lowered.
Jones M882 Free Motion Embroidery / Quilting Foot
Large opening for free-motion embroidery, quilting and creative work.
Jones M882 Free Motion Quilting Foot - Open Toe
Open front gives a clear view while free-motion quilting.
Jones M882 Adjustable Blind Stitch Foot
Sews almost invisible hems on skirts, trousers and curtains.
Jones M882 3 Mixed Piping Feet - 1x 1/8 inch - 1x 1/4 inch - 1x 3/8 inch
Three piping feet covering 1/8", 1/4" and 3/8" cord sizes.
Jones M882 1/8 Inch Groove Piping Foot
Sews fine piping with 1/8" cord for delicate edges.
Jones M882 3/16 Inch Groove Piping Foot
Sews piping with 3/16" cord close and even along the edge.
Jones M882 1/4 Inch Groove Piping Foot
Sews piping with 1/4" cord close and even along the edge.
Jones M882 3/8 Inch Groove Piping Foot
Sews piping with 3/8" cord close and even along the edge.
Jones M882 Clear View 3/16 Inch Piping Foot
Clear foot for 3/16" piping so you can see the cord as you sew.
Jones M882 Double Groove 1/4 Inch Piping Foot
Double groove for 1/4" piping and twin-cord decorative work.
Jones M882 Ruffler Foot & Instructions
Creates neat gathers and pleats in one pass. Instructions included.
Jones M882 1/4 Inch Plastic Quilting Foot & Guide
Keeps a steady 1/4" seam for patchwork. Guide included.
Jones M882 1/4 Inch Metal Quilting Foot & Guide
Metal 1/4" foot with guide for accurate patchwork seams.
Jones M882 Slide Buttonhole Foot
Sliding foot for measured buttonholes of a consistent length.
Jones M882 Button Hole Foot
Helps you sew neat, evenly sized buttonholes.
Jones M882 Open Toe Buttonhole Foot
Open toe for a clear view when placing buttonholes.
Jones M882 Button Sew On Foot
Holds the button steady while you stitch it in place.
Jones M882 Bias Tape Binding Foot
Feeds bias tape so you can bind raw edges in one pass.
Jones M882 Bias Binder Binding Foot
Folds bias binding and stitches it onto the fabric edge.
Jones M882 1/8 Rolled Hem Foot
Rolls a narrow 1/8" hem on light fabrics such as chiffon.
Jones M882 6mm Rolled Hem Foot
Rolls a 6mm hem on light to medium-weight fabrics.
Jones M882 Knit Foot
Helps feed stretch and knit fabrics with less puckering.
Jones M882 6mm Felling Foot
Forms neat flat-fell seams about 6mm wide.
Jones M882 Adjustable Sequins Ribbon Foot
Guides sequins, ribbon or braid so you can sew them on neatly.
Jones M882 Fringe Tailor Tacking Foot
Forms fringe loops and tailor tacks for marking or trim.
Jones M882 Gathering Foot
Gathers fabric as you sew — ideal for ruffles and fullness.
Jones M882 Shirring Foot
Makes even shirring and soft elasticated gathers.
Jones M882 5 Groove Pintuck Foot
Twin-needle pintucks with five grooves for neat spacing.
Jones M882 9 Groove Pintuck Foot
Twin-needle pintucks with nine grooves for finer spacing.
Jones M882 Applique Foot
Clear view for applique work and satin-stitch edges.
Jones M882 Open Toe Embroidery Foot
Open front so you can see clearly while embroidering.
Jones M882 Overcast Edging Foot
Neatens raw edges with an overcast stitch to reduce fraying.
Jones M882 Edge / Joining Stitch In A Ditch Foot
Joins fabric edges or stitches neatly in the ditch for binding and quilting.
Jones M882 Ruler Foot
Runs against quilting rulers for smooth, guided free-motion lines.
Jones M882 3 Strand Multi Cording Foot
Holds up to three cords for neat decorative cording.
Jones M882 Multicord Foot 5 Hole
Guides up to five cords for decorative multi-cord stitching.
Jones M882 Shuttle Hook
Replacement hook that forms the lockstitch with the bobbin thread.
Jones M882 Oil 1 Ounce Bottle
Clean sewing-machine oil for regular lubrication and quieter running.
Jones M882 4 x Red Sewing Machine Spool Pin Felts
Replacement red felts for spool pins on many Singer and other machines.