Lemair 803 Sewing Machine Parts
New parts for your machine below. Choose a foot, belt, bobbin or needle, then check out with PayPal or card.
Pay with PayPal or card
Lemair 803 Replacement YDK Foot Control Pedal
Foot control to start, stop and vary sewing speed.
Lemair 803 Bobbin Winder Ring Tyre
Replacement rubber ring for the bobbin winder.
Lemair 803 Rubber Stretch Belt
Replacement drive belt to restore smooth machine running.
Lemair 803 Motor, Belt & Foot Control Set
Foot control to start, stop and vary sewing speed.
Lemair 803 Bobbin Case
Holds the bobbin and controls lower-thread tension.
Lemair 803 Metal Bobbins x 10
Pack of 10 sturdy metal bobbins, ready to wind and sew.
Lemair 803 2 Packets of 10 Organ Assorted Needles
Two packs of Organ needles in mixed sizes for everyday sewing.
Lemair 803 Walking Foot & Guide & Instructions
Feeds thick layers evenly so seams stay matched. Guide and instructions included.
Lemair 803 Zig Zag Presser Foot
Everyday foot for zig zag stitching and light decorative work.
Lemair 803 Adjustable Invisible Zip Foot
Sews concealed zips close to the teeth for a tidy finish.
Lemair 803 Adjustable Zip / Zipper Foot
Sews standard zips and edged trims right beside the teeth.
Lemair 803 Hinged Teflon Zip Zipper Foot
Non-stick zip foot that slides over leather, vinyl and sticky fabrics.
Lemair 803 Roller Foot
Rolls over leather, vinyl and other fabrics that stick or drag.
Lemair 803 Non-Stick Zig Zag Teflon Foot
Non-stick zig zag foot for leather, vinyl and other sticky fabrics.
Lemair 803 Free Hand Embroidery / Darning Foot
For free-motion embroidery and darning with the feed dogs lowered.
Lemair 803 Free Motion Embroidery / Quilting Foot
Large opening for free-motion embroidery, quilting and creative work.
Lemair 803 Free Motion Quilting Foot - Open Toe
Open front gives a clear view while free-motion quilting.
Lemair 803 Adjustable Blind Stitch Foot
Sews almost invisible hems on skirts, trousers and curtains.
Lemair 803 Slide Buttonhole Foot
Sliding foot for measured buttonholes of a consistent length.
Lemair 803 Button Hole Foot
Helps you sew neat, evenly sized buttonholes.
Lemair 803 Open Toe Buttonhole Foot
Open toe for a clear view when placing buttonholes.
Lemair 803 Button Sew On Foot
Holds the button steady while you stitch it in place.
Lemair 803 Bias Tape Binding Foot
Feeds bias tape so you can bind raw edges in one pass.
Lemair 803 Bias Binder Binding Foot
Folds bias binding and stitches it onto the fabric edge.
Lemair 803 Knit Foot
Helps feed stretch and knit fabrics with less puckering.
Lemair 803 6mm Felling Foot
Forms neat flat-fell seams about 6mm wide.
Lemair 803 Adjustable Sequins Ribbon Foot
Guides sequins, ribbon or braid so you can sew them on neatly.
Lemair 803 Fringe Tailor Tacking Foot
Forms fringe loops and tailor tacks for marking or trim.
Lemair 803 Gathering Foot
Gathers fabric as you sew — ideal for ruffles and fullness.
Lemair 803 5 Groove Pintuck Foot
Twin-needle pintucks with five grooves for neat spacing.
Lemair 803 9 Groove Pintuck Foot
Twin-needle pintucks with nine grooves for finer spacing.
Lemair 803 Applique Foot
Clear view for applique work and satin-stitch edges.
Lemair 803 Open Toe Embroidery Foot
Open front so you can see clearly while embroidering.
Lemair 803 Overcast Edging Foot
Neatens raw edges with an overcast stitch to reduce fraying.
Lemair 803 Edge / Joining Stitch In A Ditch Foot
Joins fabric edges or stitches neatly in the ditch for binding and quilting.
Lemair 803 3 Strand Multi Cording Foot
Holds up to three cords for neat decorative cording.
Lemair 803 Multicord Foot 5 Hole
Guides up to five cords for decorative multi-cord stitching.
Lemair 803 Shuttle Hook
Replacement hook that forms the lockstitch with the bobbin thread.
Lemair 803 4 x Red Sewing Machine Spool Pin Felts
Replacement red felts for spool pins on many Singer and other machines.
Lemair 803 Ruffler / Pleating Foot
Creates neat gathers and pleats in one pass.