Jones XL 5001 Sewing Machine Parts
New parts for your machine below. Choose a foot, belt, bobbin or needle, then check out with PayPal or card.
Pay with PayPal or card
Jones XL 5001 2 Packets of 10 Organ Assorted Needles
Two packs of Organ needles in mixed sizes for everyday sewing.
Jones XL 5001 Walking Foot & Guide & Instructions
Feeds thick layers evenly so seams stay matched. Guide and instructions included.
Jones XL 5001 Zig Zag Presser Foot
Everyday foot for zig zag stitching and light decorative work.
Jones XL 5001 Straight Stitch Foot
Gives a clean, even straight stitch for seams and topstitching.
Jones XL 5001 Adjustable Invisible Zip Foot
Sews concealed zips close to the teeth for a tidy finish.
Jones XL 5001 Adjustable Zip / Zipper Foot
Sews standard zips and edged trims right beside the teeth.
Jones XL 5001 Hinged Teflon Zip Zipper Foot
Non-stick zip foot that slides over leather, vinyl and sticky fabrics.
Jones XL 5001 Roller Foot
Rolls over leather, vinyl and other fabrics that stick or drag.
Jones XL 5001 Straight Stitch Teflon Foot
Non-stick foot for straight stitching on leather, vinyl and coated cloth.
Jones XL 5001 Non-Stick Zig Zag Teflon Foot
Non-stick zig zag foot for leather, vinyl and other sticky fabrics.
Jones XL 5001 Darning Foot
Free-motion foot for darning holes and mending worn areas.
Jones XL 5001 Free Hand Embroidery / Darning Foot
For free-motion embroidery and darning with the feed dogs lowered.
Jones XL 5001 Free Motion Embroidery / Quilting Foot
Large opening for free-motion embroidery, quilting and creative work.
Jones XL 5001 Free Motion Quilting Foot - Open Toe
Open front gives a clear view while free-motion quilting.
Jones XL 5001 Adjustable Blind Stitch Foot
Sews almost invisible hems on skirts, trousers and curtains.
Jones XL 5001 1/8 Inch Groove Piping Foot
Sews fine piping with 1/8" cord for delicate edges.
Jones XL 5001 3/16 Inch Groove Piping Foot
Sews piping with 3/16" cord close and even along the edge.
Jones XL 5001 1/4 Inch Groove Piping Foot
Sews piping with 1/4" cord close and even along the edge.
Jones XL 5001 3/8 Inch Groove Piping Foot
Sews piping with 3/8" cord close and even along the edge.
Jones XL 5001 Clear View 3/16 Inch Piping Foot
Clear foot for 3/16" piping so you can see the cord as you sew.
Jones XL 5001 Double Groove 1/4 Inch Piping Foot
Double groove for 1/4" piping and twin-cord decorative work.
Jones XL 5001 Ruffler Foot & Instructions
Creates neat gathers and pleats in one pass. Instructions included.
Jones XL 5001 1/4 Inch Plastic Quilting Foot & Guide
Keeps a steady 1/4" seam for patchwork. Guide included.
Jones XL 5001 1/4 Inch Metal Quilting Foot & Guide
Metal 1/4" foot with guide for accurate patchwork seams.
Jones XL 5001 Slide Buttonhole Foot
Sliding foot for measured buttonholes of a consistent length.
Jones XL 5001 Button Hole Foot
Helps you sew neat, evenly sized buttonholes.
Jones XL 5001 Open Toe Buttonhole Foot
Open toe for a clear view when placing buttonholes.
Jones XL 5001 Button Sew On Foot
Holds the button steady while you stitch it in place.
Jones XL 5001 Bias Tape Binding Foot
Feeds bias tape so you can bind raw edges in one pass.
Jones XL 5001 1/8 Rolled Hem Foot
Rolls a narrow 1/8" hem on light fabrics such as chiffon.
Jones XL 5001 6mm Rolled Hem Foot
Rolls a 6mm hem on light to medium-weight fabrics.
Jones XL 5001 Knit Foot
Helps feed stretch and knit fabrics with less puckering.
Jones XL 5001 6mm Felling Foot
Forms neat flat-fell seams about 6mm wide.
Jones XL 5001 Adjustable Sequins Ribbon Foot
Guides sequins, ribbon or braid so you can sew them on neatly.
Jones XL 5001 Fringe Tailor Tacking Foot
Forms fringe loops and tailor tacks for marking or trim.
Jones XL 5001 Gathering Foot
Gathers fabric as you sew — ideal for ruffles and fullness.
Jones XL 5001 Shirring Foot
Makes even shirring and soft elasticated gathers.
Jones XL 5001 5 Groove Pintuck Foot
Twin-needle pintucks with five grooves for neat spacing.
Jones XL 5001 9 Groove Pintuck Foot
Twin-needle pintucks with nine grooves for finer spacing.
Jones XL 5001 Applique Foot
Clear view for applique work and satin-stitch edges.
Jones XL 5001 Open Toe Embroidery Foot
Open front so you can see clearly while embroidering.
Jones XL 5001 Overcast Edging Foot
Neatens raw edges with an overcast stitch to reduce fraying.
Jones XL 5001 Edge / Joining Stitch In A Ditch Foot
Joins fabric edges or stitches neatly in the ditch for binding and quilting.
Jones XL 5001 Ruler Foot
Runs against quilting rulers for smooth, guided free-motion lines.
Jones XL 5001 3 Strand Multi Cording Foot
Holds up to three cords for neat decorative cording.
Jones XL 5001 Multicord Foot 5 Hole
Guides up to five cords for decorative multi-cord stitching.
Jones XL 5001 4 x Red Sewing Machine Spool Pin Felts
Replacement red felts for spool pins on many Singer and other machines.