Vanguard HZ-600F Sewing Machine Parts
New parts for your machine below. Choose a foot, belt, bobbin or needle, then check out with PayPal or card.
Pay with PayPal or card
Vanguard HZ-600F 2 Packets of 10 Organ Assorted Needles
Two packs of Organ needles in mixed sizes for everyday sewing.
Vanguard HZ-600F Walking Foot & Guide & Instructions
Feeds thick layers evenly so seams stay matched. Guide and instructions included.
Vanguard HZ-600F Zig Zag Presser Foot
Everyday foot for zig zag stitching and light decorative work.
Vanguard HZ-600F Straight Stitch Foot
Gives a clean, even straight stitch for seams and topstitching.
Vanguard HZ-600F Adjustable Invisible Zip Foot
Sews concealed zips close to the teeth for a tidy finish.
Vanguard HZ-600F Adjustable Zip / Zipper Foot
Sews standard zips and edged trims right beside the teeth.
Vanguard HZ-600F Hinged Teflon Zip Zipper Foot
Non-stick zip foot that slides over leather, vinyl and sticky fabrics.
Vanguard HZ-600F Roller Foot
Rolls over leather, vinyl and other fabrics that stick or drag.
Vanguard HZ-600F Straight Stitch Teflon Foot
Non-stick foot for straight stitching on leather, vinyl and coated cloth.
Vanguard HZ-600F Non-Stick Zig Zag Teflon Foot
Non-stick zig zag foot for leather, vinyl and other sticky fabrics.
Vanguard HZ-600F Darning Foot
Free-motion foot for darning holes and mending worn areas.
Vanguard HZ-600F Free Hand Embroidery / Darning Foot
For free-motion embroidery and darning with the feed dogs lowered.
Vanguard HZ-600F Free Motion Embroidery / Quilting Foot
Large opening for free-motion embroidery, quilting and creative work.
Vanguard HZ-600F Free Motion Quilting Foot - Open Toe
Open front gives a clear view while free-motion quilting.
Vanguard HZ-600F Adjustable Blind Stitch Foot
Sews almost invisible hems on skirts, trousers and curtains.
Vanguard HZ-600F 1/8 Inch Groove Piping Foot
Sews fine piping with 1/8" cord for delicate edges.
Vanguard HZ-600F 3/16 Inch Groove Piping Foot
Sews piping with 3/16" cord close and even along the edge.
Vanguard HZ-600F 1/4 Inch Groove Piping Foot
Sews piping with 1/4" cord close and even along the edge.
Vanguard HZ-600F 3/8 Inch Groove Piping Foot
Sews piping with 3/8" cord close and even along the edge.
Vanguard HZ-600F Clear View 3/16 Inch Piping Foot
Clear foot for 3/16" piping so you can see the cord as you sew.
Vanguard HZ-600F Double Groove 1/4 Inch Piping Foot
Double groove for 1/4" piping and twin-cord decorative work.
Vanguard HZ-600F Ruffler Foot & Instructions
Creates neat gathers and pleats in one pass. Instructions included.
Vanguard HZ-600F 1/4 Inch Plastic Quilting Foot & Guide
Keeps a steady 1/4" seam for patchwork. Guide included.
Vanguard HZ-600F 1/4 Inch Metal Quilting Foot & Guide
Metal 1/4" foot with guide for accurate patchwork seams.
Vanguard HZ-600F Slide Buttonhole Foot
Sliding foot for measured buttonholes of a consistent length.
Vanguard HZ-600F Button Hole Foot
Helps you sew neat, evenly sized buttonholes.
Vanguard HZ-600F Open Toe Buttonhole Foot
Open toe for a clear view when placing buttonholes.
Vanguard HZ-600F Button Sew On Foot
Holds the button steady while you stitch it in place.
Vanguard HZ-600F Bias Tape Binding Foot
Feeds bias tape so you can bind raw edges in one pass.
Vanguard HZ-600F 1/8 Rolled Hem Foot
Rolls a narrow 1/8" hem on light fabrics such as chiffon.
Vanguard HZ-600F 6mm Rolled Hem Foot
Rolls a 6mm hem on light to medium-weight fabrics.
Vanguard HZ-600F Knit Foot
Helps feed stretch and knit fabrics with less puckering.
Vanguard HZ-600F 6mm Felling Foot
Forms neat flat-fell seams about 6mm wide.
Vanguard HZ-600F Adjustable Sequins Ribbon Foot
Guides sequins, ribbon or braid so you can sew them on neatly.
Vanguard HZ-600F Fringe Tailor Tacking Foot
Forms fringe loops and tailor tacks for marking or trim.
Vanguard HZ-600F Gathering Foot
Gathers fabric as you sew — ideal for ruffles and fullness.
Vanguard HZ-600F Shirring Foot
Makes even shirring and soft elasticated gathers.
Vanguard HZ-600F 5 Groove Pintuck Foot
Twin-needle pintucks with five grooves for neat spacing.
Vanguard HZ-600F 9 Groove Pintuck Foot
Twin-needle pintucks with nine grooves for finer spacing.
Vanguard HZ-600F Applique Foot
Clear view for applique work and satin-stitch edges.
Vanguard HZ-600F Open Toe Embroidery Foot
Open front so you can see clearly while embroidering.
Vanguard HZ-600F Overcast Edging Foot
Neatens raw edges with an overcast stitch to reduce fraying.
Vanguard HZ-600F Edge / Joining Stitch In A Ditch Foot
Joins fabric edges or stitches neatly in the ditch for binding and quilting.
Vanguard HZ-600F Ruler Foot
Runs against quilting rulers for smooth, guided free-motion lines.
Vanguard HZ-600F 3 Strand Multi Cording Foot
Holds up to three cords for neat decorative cording.
Vanguard HZ-600F Multicord Foot 5 Hole
Guides up to five cords for decorative multi-cord stitching.
Vanguard HZ-600F 4 x Red Sewing Machine Spool Pin Felts
Replacement red felts for spool pins on many Singer and other machines.