Pinnock Trendsetter Sewing Machine Parts
New parts for your machine below. Choose a foot, belt, bobbin or needle, then check out with PayPal or card.
Pay with PayPal or card
Pinnock Trendsetter Replacement YDK Foot Control Pedal
Foot control to start, stop and vary sewing speed.
Pinnock Trendsetter Motor, Belt & Foot Control Set
Foot control to start, stop and vary sewing speed.
Pinnock Trendsetter 2 Packets of 10 Organ Assorted Needles
Two packs of Organ needles in mixed sizes for everyday sewing.
Pinnock Trendsetter Walking Foot & Guide & Instructions
Feeds thick layers evenly so seams stay matched. Guide and instructions included.
Pinnock Trendsetter Zig Zag Presser Foot
Everyday foot for zig zag stitching and light decorative work.
Pinnock Trendsetter Straight Stitch Foot
Gives a clean, even straight stitch for seams and topstitching.
Pinnock Trendsetter Adjustable Invisible Zip Foot
Sews concealed zips close to the teeth for a tidy finish.
Pinnock Trendsetter Adjustable Zip / Zipper Foot
Sews standard zips and edged trims right beside the teeth.
Pinnock Trendsetter Hinged Teflon Zip Zipper Foot
Non-stick zip foot that slides over leather, vinyl and sticky fabrics.
Pinnock Trendsetter Straight Stitch Teflon Foot
Non-stick foot for straight stitching on leather, vinyl and coated cloth.
Pinnock Trendsetter Non-Stick Zig Zag Teflon Foot
Non-stick zig zag foot for leather, vinyl and other sticky fabrics.
Pinnock Trendsetter Free Hand Embroidery / Darning Foot
For free-motion embroidery and darning with the feed dogs lowered.
Pinnock Trendsetter Free Motion Embroidery / Quilting Foot
Large opening for free-motion embroidery, quilting and creative work.
Pinnock Trendsetter Free Motion Quilting Foot - Open Toe
Open front gives a clear view while free-motion quilting.
Pinnock Trendsetter Adjustable Blind Stitch Foot
Sews almost invisible hems on skirts, trousers and curtains.
Pinnock Trendsetter 3 Mixed Piping Feet - 1x 1/8 inch - 1x 1/4 inch - 1x 3/8 inch
Three piping feet covering 1/8", 1/4" and 3/8" cord sizes.
Pinnock Trendsetter 3/16 Inch Groove Piping Foot
Sews piping with 3/16" cord close and even along the edge.
Pinnock Trendsetter 1/4 Inch Groove Piping Foot
Sews piping with 1/4" cord close and even along the edge.
Pinnock Trendsetter 3/8 Inch Groove Piping Foot
Sews piping with 3/8" cord close and even along the edge.
Pinnock Trendsetter Clear View 3/16 Inch Piping Foot
Clear foot for 3/16" piping so you can see the cord as you sew.
Pinnock Trendsetter Double Groove 1/4 Inch Piping Foot
Double groove for 1/4" piping and twin-cord decorative work.
Pinnock Trendsetter Ruffler Foot & Instructions
Creates neat gathers and pleats in one pass. Instructions included.
Pinnock Trendsetter 1/4 Inch Plastic Quilting Foot & Guide
Keeps a steady 1/4" seam for patchwork. Guide included.
Pinnock Trendsetter 1/4 Inch Metal Quilting Foot & Guide
Metal 1/4" foot with guide for accurate patchwork seams.
Pinnock Trendsetter Slide Buttonhole Foot
Sliding foot for measured buttonholes of a consistent length.
Pinnock Trendsetter Bias Binder Binding Foot
Folds bias binding and stitches it onto the fabric edge.
Pinnock Trendsetter Adjustable Sequins Ribbon Foot
Guides sequins, ribbon or braid so you can sew them on neatly.
Pinnock Trendsetter Fringe Tailor Tacking Foot
Forms fringe loops and tailor tacks for marking or trim.
Pinnock Trendsetter Overcast Edging Foot
Neatens raw edges with an overcast stitch to reduce fraying.
Pinnock Trendsetter Edge / Joining Stitch In A Ditch Foot
Joins fabric edges or stitches neatly in the ditch for binding and quilting.
Pinnock Trendsetter 3 Strand Multi Cording Foot
Holds up to three cords for neat decorative cording.
Pinnock Trendsetter Multicord Foot 5 Hole
Guides up to five cords for decorative multi-cord stitching.